Teranishi Chemical Industry Empty Pen Set (Extra Fine - 0.3mm)

Leave a mark that is uniquely yours with the Teranishi Chemical Industry blank pens which is to be customised with your favorite inks. 

This pen features an extra fine 0.3 mm fineliner tip and comes in a pack of 3 pens.

Items to prepare

• Fountain pen ink (water-based dye) - we recommend the use of the Guitar Taisho Roman Fountain Pen Inks!
• Small container for ink (paper cup, etc.)
• Tissue or paper towel

How to use

• Using the dropper provided, take a small amount (2ml - 2.5ml) of bottled fountain pen ink (dye base ink) and place it into a small container/cup.
• Dip one end of the blank core in the container/cup of ink. You will see the ink rising up the core as it is absorbed. When the core is about 80% full, pull it out and wipe off any ink from the outside. 
• Insert the colored core into the pen body (the ink soaked side toward the pen tip side), then insert the included stopper behind it. Press down on the stopper (against a flat surface) until it snaps securely into place.

Important Notes:

• Ink is not included.
• These pens can be filled with bottled fountain pen ink/dye based inks
• If too much ink is absorbed by the core, it may cause ink leakage
• Please allow the ink to absorb into the core only from one side
• Once the stopper is in place, it cannot be removed.

Product specifications:

• Contents: Core x 3 / Main body shaft x 3 / Tail plug x 3 / Dropper x 1
• Size: 80 x 10 x 185 (mm)
• 3 pieces
• Use Possible fountain pen ink: Water-based dye, extra-fine pen type (writing line width 0.3 mm)